How to run a BGMI tournament with custom rooms: groups, finals and points
Updated 11 November 2026 · 8 min read · By the Esports Hub team
Short answer
Run a BGMI tournament by splitting your squads into groups, playing a few matches per group in custom rooms, taking the top squads from each group to a final lobby, and ranking everyone with a published points scale. Plan the schedule first: the number of lobbies decides how long the day is.
Official BGMI events are run by the publisher and its partners. This guide is for the many smaller events: a college fest, a club league or a community cup. The problem is always the same: more squads than one lobby can hold, and one day to play. Here is a format and a plan that works, with the arithmetic shown.
Know how many squads fit in a room
A custom room holds a limited number of players, and the limit depends on the mode and the current version of the game. Look it up in the game itself before you fix your numbers. Everything below uses a variable, squads per room, so you can plug in your own value.
If you have S squads and a room takes R squads, you need at least S ÷ R rooms, rounded up. For example, if a room took 25 squads, 100 squads would need 4 rooms for the first stage. Whatever your R is, the point is the same: the first stage is played in several rooms at once or one after another, and the schedule decides which.
Pick a two-stage format
- Stage one (groups): split the squads into groups of at most R. Each group plays the same number of matches, for example three.
- Stage two (final lobby): the top squads from each group play a final lobby, again with a fixed number of matches.
- Final result: either the final lobby points alone, or the final lobby points added to stage one. Choose one and write it in the rules.
Put the cut-off in numbers: for instance, the top 5 squads of each of 4 groups would make a 20-squad final. Keep final lobby size at or under R. If groups are uneven in strength, seed the squads across groups so that the strongest do not all land together.
Write the points scale before the first match
Use a placement and kill scale and tell squads in writing. Points tables published for official events are specific to those events and change, so treat them as a reference and set your own. Our points table guide shows how to do the sums and the tie-breakers, and the calculator does them for you.
As an example, with the calculator's example scale a first place with 4 kills is worth 14 points and a third place with 6 kills is worth 11 points. Kills matter, so say how you will count them and who decides when a screenshot is unclear.
Plan the room schedule
Each match takes longer than its in-game time: squads join, the host checks them, and results are collected. Plan 10 to 15 minutes of gap between matches. With one room host you can run one lobby at a time; with more hosts and a second set of phones, you can run groups in parallel. The schedule maker turns your lobbies and breaks into a timed run-sheet with the finish time.
Build in a longer break after the group stage so the host can enter results, announce who qualified and brief the final lobby. If the day is short, cut the number of matches, not the gap.
Registration, rooms and fair play
- Register squads, not players. Collect the squad name, a captain contact, four players with in-game names and IDs, and a substitute.
- Share the room ID and password a few minutes before each match, only with the squads in it.
- Say in the rules what happens with late squads, disconnects and rule breaks. Use the rules template.
- Keep a separate referee for disputes and screenshot checks.
Create the form with the registration tool and read the form fields guide first.
Prizes, branding and the publisher
Publisher conditions for tournaments, entry fees and prizes change over time, and Indian rules on prizes and fees can be a legal question. This site does not give legal advice. Read the publisher's current policy, get your college's written permission, and ask a legal adviser before advertising cash prizes. Do not use a publisher's logos in a way that suggests the event is official.
On the day
- Check squads in, or confirm they are in the room, against the registration list.
- Run the matches to the written schedule and update the table after every match.
- Show the live standings on a screen with the display screen.
- Announce the qualifiers, play the final, publish the final table and give certificates.
A worked example with numbers you can replace
Suppose the room limit in your version of the game allowed 20 squads, and 60 squads registered. That is 3 groups of 20. Each group plays 3 matches, so the group stage is 9 matches. If the top 6 from each group go through, the final lobby has 18 squads, below the room limit, and plays 4 matches.
| Stage | Matches | Lobbies at once | Time from 10:00 (30 min matches, 10 min gaps) |
|---|---|---|---|
| Group stage | 9 | 3 | 3 slots: ends 11:50 |
| Group stage | 9 | 1 | 9 slots: ends 15:50 |
| Final lobby (4 matches) | 4 | 1 | 4 slots: 150 minutes in total |
These are the match schedule maker's own results for those numbers, and the room limit of 20 is an illustration, not a fact about the game. With one lobby the group stage alone takes all day, so you would need several hosts and phones, or fewer squads. Put your real room limit in first and the day becomes a plan.
Checklist
- Room limit looked up in the current version of the game.
- Groups, matches per group and the cut-off for the final decided and written in the rules.
- Points scale and tie-breakers published.
- One host and one referee per lobby that runs at once.
- A longer break between the group stage and the final for results and a briefing.
- A table per group in the points table calculator, and a separate one for the final.
Common mistakes
- Letting a group be larger than a room can hold, so squads are turned away on the day.
- Seeding badly so that the strongest squads are all in one group and one of them is knocked out early.
- No tie-breaker for the last qualifying place, so a cut-off becomes an argument.
- Forgetting that matches take longer than their in-game length.
- Not deciding whether the final adds the group points.
Questions and answers
The things people ask most about this, answered plainly.
How do I run a BGMI tournament with more squads than one room can take?
Split the squads into groups no bigger than a room, give every group the same number of matches and send the best squads from each group to a final lobby. Seed the squads so the strongest are not all in one group. Look up your room limit in the game itself, because it depends on mode and version. The points table calculator ranks each group, and the schedule maker turns lobbies and breaks into a timed run-sheet.
Should the BGMI final add up the group stage points?
Either works, but choose before the event and write it in the rules. Final-lobby points alone keep the final simple and give every qualified squad a fresh start. Adding stage one points rewards consistency but needs a clear explanation for captains. Whichever you pick, run the final as its own table in the points table calculator, or enter both stages and add the totals, so the result is checkable.
Is the calculator's scale the official BGMI points system?
No. The numbers that appear when the points table calculator loads are only an example. Official events publish their own scales and change them, so use your own and say so. Type your placement points and points per kill into the calculator, publish them with the registration link, and do not change them after the first match, because that changes how squads should have played.
How long does a BGMI group stage and final take?
It depends on the number of lobbies. As an illustration only, if you had 3 groups of 3 matches each, run in 3 lobbies at once with 30 minute matches and 10 minute gaps, the group stage takes 110 minutes from the first start; in one lobby it takes 350. Enter your own numbers in the match schedule maker to see your finish time, and put a longer break after the group stage for results and the final briefing.
Can I run BGMI tournaments for money?
That depends on the publisher's current conditions and on the law that applies to you, and this site cannot tell you either. Check the publisher's policy, get your college's written permission and ask a legal adviser before you advertise cash prizes or an entry fee. A free-entry event avoids most of these questions, and you can still give winners and participants certificates from the free certificate maker.
What should the BGMI squad registration collect?
One entry per squad: the squad name, a captain's phone or email, four players with in-game names and IDs, and a substitute. Ask whether any player is under 18 and get a guardian's consent. Leave out ID numbers and addresses. The registration tool on this site gives you a copyable squad form without an account, or with a free account a link where captains register and you approve each squad into your roster.
Try it
Free to use, no account needed.
Keep reading
Spotted a mistake or something out of date? Tell us on the contact page and we will fix it. How we write and update guides: about this site.