Skip to content

Points table maker for BGMI, Free Fire and battle royale

Make a points table in your browser: no app to install, no account. For a BGMI or Free Fire custom-room event, set your own placement and kill points, enter each team's results for every match, and get ranked standings with tie-breakers, ready to share as a picture or show on a TV. For a cricket or football league table with wins, draws and losses, use the round robin tool. Free.

Work out your standings

Step 1: Set how points work

In battle royale, a team earns points for where it finished (placement) plus points for every kill. Tell the tool your rulebook's numbers, or just tap the example button.

8 places score

Type the points for each finishing position, separated by commas. With this list, 1st place gets 10 points, 2nd place gets 6 points, 3rd place gets 5 points, and so on. A team below the end of the list gets 0 placement points.

The example is only a sample. Use your own rulebook's scale for a real event.

Step 2: Enter each team's results

Add a row per team. For every match write Place (where the team finished) and Kills (how many kills it got) once the match ends.

12 of 12 results entered
  • Match 1
    Match 2
    Match 3
  • Match 1
    Match 2
    Match 3
  • Match 1
    Match 2
    Match 3
  • Match 1
    Match 2
    Match 3

Step 3: Read the standings

Teams are ranked by total points, best first. It updates by itself as you type, so there is nothing to press.

Leading: Charlie, 34 points
RankTeamM1M2M3KillsWinsTotal
1Charlie7131413134
2Bravotie-break1214411130
3Alphatie-break156910130
4Delta761110024

M1, M2... = points earned in each match. Wins = matches finished 1st. A tie-break is the rule that orders teams on the same total: most wins, then most kills, then the better place in the last match, then team name. Put your own tie-breakers in your rules before the event.

Winners

The results are in. Share a poster, or make certificates for the winners.

  1. 1stCharlie
  2. 2ndBravo
  3. 3rdAlpha
Poster shape:
Make winner certificates

Step 4: Show the standings on a TV or stream (optional)

Opens a big, clean full-screen view for a venue TV, a projector or your live stream. Keep both windows open and the screen updates whenever you change something here.

Change the look · now: Midnight
Screen design

For streams and overlays

For venue TVs and big screens

For projectors and bright rooms

A copied link is a snapshot of right now. To keep a stream updating, capture the open screen window in OBS instead of using the link.

Sponsors and announcements · none yet

Sponsors (up to 4)

No sponsors yet.

    Logos are shrunk to fit in your browser (no more than 240 pixels wide and 60 KB). Nothing is uploaded: they are saved in this browser and travel inside the screen link. A very long link may carry names only.

    Share the standings as a picture or message

    Makes an image in the design you chose below. On a phone it opens the share sheet; on a computer it saves the file.

    Shape:
    Send the text on WhatsApp

    Sign in to publish this on your event's live page. Sign in

    Why use this points table maker for BGMI and Free Fire

    Your scale, your rules

    Type any placement scale and kill value. The example scale is only an example: use the one in your own rulebook.

    Clear tie-breakers

    Ties are broken by most wins, then most kills, then the better placement in the last match, then name, so the same input always gives the same order.

    Export

    Download the standings as a CSV file for a spreadsheet or to post to your players.

    How to use the points table maker for BGMI and Free Fire

    1. 1Enter your placement points and the points per kill.
    2. 2Choose how many matches were played.
    3. 3Enter each team's placement and kills for each match.
    4. 4Read the ranked table and download it if you want a copy.

    Guides that help

    Points table maker for BGMI and Free Fire: questions and answers

    Straight answers about how this tool works, what it can and cannot do, and where your data goes.

    1. Can I make a cricket or football points table here?

      This tool is built for battle royale scoring: placement points plus kill points over several matches, as used in BGMI and Free Fire custom rooms. A cricket or football league table works differently, with points for a win, a draw and a loss, so use the round robin generator for those. It lists every fixture, lets you set the points for a win, draw and loss, and ranks teams by points, then score difference, then scores for, then wins. It does not calculate cricket net run rate, so work that out yourself if your league needs it.

    2. How do I make a BGMI or Free Fire points table?

      Type your placement points, such as 10, 6, 5, 4, 3, 2, 1, 1 for first to eighth place, and the points per kill. Choose how many matches were played, then enter each team's placement and kills for each match. The table adds placement points and kill points, ranks the teams and shows each match's points as well as total kills. A team that finished first with 5 kills scores 10 + 5 = 15 on the example scale. Download the result as a CSV file when you are done.

    3. Are these the official points for BGMI, Free Fire or Valorant?

      No. The numbers shown on first load are only an example of a scale often used in custom rooms. Official tournaments publish their own scales, and they change between seasons, so enter the scale from your own rulebook. You can set any placement list, up to 100 places, and any value per kill, including decimals. Placements beyond your list score zero. Valorant is not a battle royale, so use the bracket or round robin tools for it.

    4. How are ties decided in the standings?

      Teams are ranked by total points first. If two teams have the same total, the tie is broken by most first places, then most total kills, then the better placement in the last match, then team name, so the same input always gives the same order. Tied rows are marked in the data. Write your tie-breakers into the rules before the event, and if yours are different, decide those places by hand. Per-match points are shown for every team, so any player can see how a total was reached and check it against their own notes.

    5. How many matches and teams can I enter?

      You can enter from 1 to 12 matches, and as many teams as you need to add. For each team and match you enter a placement and a number of kills. A kills value must be a whole number from 0, and a blank or negative value counts as 0. A match with no placement entered scores zero placement points and counts as last place for the tie-breaker. Use the Load the example button to see a working four-team table.

    6. How many matches should a battle royale event have?

      Six is a common length for a one-day event, but follow your own rulebook. More matches reduce luck, because one lucky final circle matters less over six games than over two. Use the match schedule maker to see how long six matches take with your lobby count, gaps and breaks. The Free Fire and BGMI organiser guides show how to plan the matches, the lobbies and the finish time for a college or community event.

    7. Can I show the standings on a TV or stream?

      Yes. Press Open the screen to show the ranked table full screen on a venue TV, projector or in OBS, with the points for each match, kills and totals. There are 14 designs, such as Neon Grid, Crimson Strike and Stadium Lights, and a transparent background for streams. The screen updates as you type results while the tool page stays open. Nothing is uploaded and no account is needed. Seeing a clear ranked table on screen during a break keeps teams calm and ends most arguments about who is leading, because the rule is on the screen.

    8. Is my data saved or sent anywhere?

      Nothing is sent anywhere. The numbers are worked out in your browser and stay in the browser tab, and they are gone when you close it, so download the CSV file if you want to keep them. The CSV opens in Excel or Google Sheets and can be posted to your players. There is no account and no sign-up for this tool. The CSV file has one row per team with its per-match points, placement points, kill points and total, so nothing is lost when you close the page.

    9. Is a points table calculator better than a spreadsheet?

      A sheet needs formulas for placement points, kills, wins and the tie-breakers, and one wrong formula changes the ranking in front of players. This tool applies your scale and the tie-breakers the same way every time, so the result is reproducible and you can show the rule if a player complains. When you want to keep working in a sheet, download the CSV. It does not support teams that change size, or penalty points: add those by hand.

    Want to save your work online?

    The tools are free without an account. A free account adds saving events online, player invite links and live gate check-in.