Skip to content

Student ID card format: what to put on a college club or event ID card

Updated 11 November 2026 · 7 min read · By the Esports Hub team

Short answer

A student ID card for a club or event should show a photo, the full name, the college and course or team, an ID or roll number, a validity date and a QR code, on a standard wallet card of about 85 × 54 mm. For a fest or tournament you can design and print these free in a browser.

This guide is about ID cards that a college club, fest committee or esports team issues for its own members and events: access cards, team cards and participant badges. It is not about the official identity card a college or a government office issues. For official cards, follow your institution's own format.

What the card is for

Before choosing fields, write one sentence on what the card must do. A fest pass must let the gate tell participants from visitors. A team card must show which team a person plays for. A club card must prove membership. The purpose decides what belongs on the card and what does not. See player ID cards and passes for the esports case in detail.

Fields to include

FieldWhyNotes
PhotoLets staff match a face to the cardPlain background, face clearly visible, same crop for every card
Full nameThe main thing staff checkLargest text on the card; check spelling against the roster
College or clubShows who issued itAdd your own logo; do not use a logo you do not have the right to
Team, course or roleTells staff what the person may doPlayer, captain, coach, volunteer, organiser
ID or roll numberMakes the card uniqueUse your own event number; avoid government ID numbers
Valid until / event dateStops old cards being reusedOne date is enough
QR codeFast scanning at the gateSigned codes make copied cards detectable

Do not print Aadhaar numbers, home addresses or phone numbers on a card that many people will see. If you must record an ID for verification, keep only what you need, such as the last four digits, and keep it off the printed card.

Size and layout

The common wallet or credit-card size is about 85.6 × 54 mm, and this is the size that standard card holders and card printers expect. The ID card maker supports wallet cards at 85 × 54 mm and six other shapes, including lanyard cards, badges and phone passes. Portrait cards suit a lanyard and landscape cards suit a wallet.

  • Keep the photo in the same place on every card.
  • Use at least 9 to 10 pt text for the name so it can be read at arm's length.
  • Leave a margin of 3 mm or more from the edge, and extend the background past the cut line if you use full-colour edges (bleed).
  • Use strong contrast between text and background, and avoid thin fonts on a photo.

Make the cards

  1. Open the student ID card maker (or the ID card maker) and list your teams and people, by hand or from a spreadsheet.
  2. Pick a design for each team and adjust colours and logos.
  3. Add a QR code if you will check people in at the gate.
  4. Download the PDF, check the preview and print.

For printing, see how to print ID cards on PVC or paper. For scanning, see the gate check-in guide.

Privacy basics

Collect only what the card needs, tell people why, and get a parent or guardian's consent for anyone under 18. Delete the list and the photos when the event is over. The ID card maker works in your browser and does not upload your photos to a server.

A sample layout

For a fest team card in landscape wallet format, put the club logo at the top left and the event name beside it. Put the photo on the left, about a third of the card, and the name beside it in the largest text. Under the name put the team and the role, then the ID number and the valid-until date at the bottom, with the QR code on the right. On the back, put the organiser's contact, a short line of rules and a return address. The ID card maker lets you move and resize each of these in its editor.

AreaContents
Top stripLogo, event name
LeftPhoto
CentreName, team and role, ID number
RightQR code
BottomValid-until date
BackOrganiser contact, rules line, if-found note

Checklist and common mistakes

  1. Names checked against the roster.
  2. Photos have the same crop and a plain background.
  3. ID numbers are your own, not government numbers.
  4. Every card has a date or event name.
  5. One printed card scans correctly.
  • A thin font over a photo, so the name cannot be read.
  • A tiny QR code that does not scan from paper.
  • Printing without bleed and getting a white edge.
  • Using the college's official logo and layout as if the card were an official one.

Questions and answers

The things people ask most about this, answered plainly.

  1. What size is a standard student ID card?

    The usual wallet card is about 85.6 × 54 mm, the size card holders and card printers expect. The ID card maker uses 85 × 54 mm for wallet cards and offers six other shapes, including lanyard cards, event badges, wristband strips, poster cards, story cards and phone passes. Portrait suits a lanyard and landscape suits a wallet. Download the PDF at real size, print one test page and hold it against a real card.

  2. What fields should a student ID card for a club or event have?

    A photo, the full name, the college or club, the team, course or role, an ID or roll number that you issue, a validity date or event date, and a QR code if you will scan it at the gate. Keep government ID numbers, home addresses and phone numbers off the card. The ID card maker has fields and designs for all of these and lets you add your own logo.

  3. Can I make an official college ID card with the ID card maker?

    No. It makes cards for clubs, fests, teams and events, such as access cards, team cards and participant badges. An official college or government ID should follow the format your institution or the issuing authority sets. For a fest pass or a team card it is the right tool, and it is free and runs in your browser without an account. Say clearly on the card that it is an event pass, so nobody mistakes it for an official identity document.

  4. Should I add a QR code to a student ID card?

    If you will check people in at an event, yes. The ID card maker can print a signed QR code, and the gate check-in scanner reads it to show the photo, team and role and to flag a copied or edited card. If the card is only checked by eye, you can leave the code out. Print one card and scan it from paper before you print the whole set. The QR code is cheap to add: it costs nothing in the card maker, and it makes lost-card and stand-in problems visible at the door instead of after the event.

  5. How do I handle photos and privacy for student cards?

    Collect only what the card needs, tell people why, and get a parent or guardian's consent for anyone under 18. Use the same crop for every photo: head and shoulders, plain background. Delete the list and photos when the event is over. The ID card maker works in your browser and does not upload your photos to a server when you only make and print cards.

  6. How do I make many student cards at once?

    Type people in, or import a spreadsheet, then pick a design for each team and download one PDF with every card at real size, with crop marks and optional 3 mm bleed. Most of the time goes on collecting photos, so ask for them early in one agreed shape. With a free account you can also send teams an invite link so each player adds their own name and photo, which you approve before it reaches the roster.

Try it

Free to use, no account needed.

Keep reading

Spotted a mistake or something out of date? Tell us on the contact page and we will fix it. How we write and update guides: about this site.