Skip to content

Tournament bracket template: how to build one in a sheet, in Word or online

Updated 11 November 2026 · 8 min read · By the Esports Hub team

Short answer

A tournament bracket template is a grid of rounds in which each match feeds the winner into the next one. For 8 teams the standard first round is 1 v 8, 4 v 5, 2 v 7 and 3 v 6, and a bracket for n teams has n − 1 matches. You can draw one in a spreadsheet or Word, or generate it free in a browser.

Many organisers start with a search for a bracket template for Excel, Google Sheets or Word. A template works if you do the seeding correctly, and it is slow if the number of teams changes. This guide explains what a correct bracket is, so you can build one by hand or check the output of a generator.

What a bracket is

A single elimination bracket has rounds. Each round halves the number of teams: 16 teams play 8 matches, then 4, then 2, then the final. Every match has two slots, and the winner moves into a slot in the next round. Total matches are always n − 1, because every match removes exactly one team and one team is left.

TeamsRoundsMatchesRound of play
423Semi-finals, final
837Quarter-finals, semi-finals, final
16415Round of 16 onwards
32531Round of 32 onwards

Standard seeding: who plays whom

Seeding is the order in which teams are ranked before the draw. In a fair bracket, seed 1 plays the lowest seed, seed 2 the second lowest, and the top seeds are kept apart until the late rounds. The bracket maker uses this standard order, so a bracket for eight teams starts with these matches, in this order down the page:

SizeFirst round pairs, in bracket order
8 teams1 v 8, 4 v 5, 2 v 7, 3 v 6
16 teams1 v 16, 8 v 9, 4 v 13, 5 v 12, 2 v 15, 7 v 10, 3 v 14, 6 v 11

Notice that seeds 1 and 2 are at opposite ends, so they can only meet in the final, and seeds 1 and 4 can only meet in the semi-final. That is the whole point of seeding. If you build a template by hand, copy this order.

What to do when the number is not a power of two

Brackets work in powers of two: 4, 8, 16, 32. With 11 teams, round up to 16 and give the five empty places to the five top seeds as byes: they skip the first round. The bracket still has 11 − 1 = 10 real matches, because a bye is not a match. The same rule works for any number: the number of byes is the next power of two minus the number of teams.

A template that is fixed at 16 teams breaks when 11 register. That is the best reason to use a generator, or to build a spreadsheet that reads the number of teams.

Build it in a spreadsheet or a document

  1. List teams in seed order in one column, best first.
  2. Make a grid with one column per round and place the first-round pairs in the order shown above, leaving a blank row between pairs.
  3. In each later column, put one cell between each pair of cells in the column before it, so each match lines up with the two matches that feed it.
  4. Draw the borders that join each pair to its next match, and number the matches M1, M2, and so on so captains can refer to them.
  5. Print it landscape on A3 or two A4 pages joined, and write the winners in by hand or edit the cells live.

This works, but every change in team count means redrawing, and nothing stops a wrong winner from being written in the wrong cell.

Generate it free in the browser

The free bracket maker takes your teams, one per line, best seed first, and builds a single elimination bracket with byes for you. Click a team after each match and it moves forward. For a second life for every team, use the double elimination generator. For league-style play with a table, see the round robin generator. Nothing is uploaded and no account is needed.

For a bracket on a TV or a stream, press Open the screen and use the display screen.

Choosing the right kind of bracket

Single elimination is fast but unforgiving, double elimination is fairer but takes about twice as long, and a round robin or groups suit small fields. The formats guide compares them and shows the number of matches each one needs, so you can check whether your day fits before you announce it.

A worked example: 11 teams

Eleven teams round up to a 16-place bracket, so there are 5 byes, given to seeds 1 to 5. Standard 16-place seeding pairs seeds in this order: 1 v 16, 8 v 9, 4 v 13, 5 v 12, 2 v 15, 7 v 10, 3 v 14 and 6 v 11. Seeds 12 to 16 do not exist, so seeds 5, 4, 3, 2 and 1 skip round one.

PairResult in round one
1 v 16Seed 1 has a bye
8 v 9Played
4 v 13Seed 4 has a bye
5 v 12Seed 5 has a bye
2 v 15Seed 2 has a bye
7 v 10Played
3 v 14Seed 3 has a bye
6 v 11Played

Only 3 matches are played in round one, and the whole bracket has 10 real matches (11 − 1). The bracket maker builds exactly this from 11 pasted team names.

Common mistakes in a hand-made template

  • Seeding in the order teams registered, so the best teams may meet in round one.
  • Drawing a fixed 16-team bracket and leaving blank boxes without making the byes explicit.
  • Giving a bye to a low seed instead of a top seed.
  • Putting a winner in the wrong cell and not noticing until the next round.
  • Forgetting a third-place match when prizes depend on it.

Checklist

  1. Teams are listed in seed order, best first.
  2. The size is rounded up to the next power of two.
  3. Byes are given to the highest seeds.
  4. Matches are numbered so captains can refer to them.
  5. Someone owns updating the bracket after each match.

Questions and answers

The things people ask most about this, answered plainly.

  1. How many matches are in a single elimination bracket?

    For n teams there are n − 1 matches, because each match eliminates exactly one team and one team is left at the end. 4 teams need 3 matches, 8 need 7, 16 need 15 and 32 need 31. A bye is not a match, so 11 teams also play 10 matches. The bracket maker on this site builds the rounds from a pasted team list and shows the champion once the last winner is clicked.

  2. What are byes in a bracket and who gets them?

    A bye lets a team skip the first round when the number of teams is not a power of two. The bracket rounds up to the next power of two and the empty places become byes, given to the highest seeds. With 11 teams you round up to 16, so 5 byes go to seeds 1 to 5. The bracket maker adds them automatically for any number from small groups up to large fields.

  3. Is there a free bracket template for Excel, Google Sheets or Word?

    You can draw one by hand using the steps in this guide: list teams in seed order, place first-round pairs in the standard order, line up each later column with the two matches that feed it, and number the matches. It works but breaks when the team count changes. The free bracket maker on this site does the seeding and byes for any number of teams in your browser, with no account.

  4. How should I seed the teams in a bracket?

    Rank teams by a fair rule such as a qualifier or a previous league, enter them best first and let standard seeding do the rest: seed 1 plays the lowest seed, and seeds 1 and 2 can only meet in the final. For 16 teams the first round pairs are 1 v 16, 8 v 9, 4 v 13, 5 v 12, 2 v 15, 7 v 10, 3 v 14 and 6 v 11. If you cannot rank teams, draw seeds at random and say so.

  5. Can I share or display the bracket I make?

    You can print it, take a screenshot, or press Open the screen to show the live bracket full screen on a TV, projector or stream. Clicking a team after each match moves it forward, and the screen follows while the bracket tab stays open. A shareable link to an editable bracket is not built, so decide who updates results and keep to one person. Pick one person to click the results so the bracket on screen always matches what happened on the field.

  6. When should I use double elimination instead of a single bracket?

    When you want every team to have a second chance and you have the time. Double elimination needs up to 2n − 2 matches, or 2n − 1 with a reset final, about twice the matches of single elimination. The double elimination generator on this site builds the winners bracket, the losers bracket and the grand final for 3 to 64 teams, with byes where needed, and drops losers into the right losers-bracket match as you click winners.

Try it

Free to use, no account needed.

Keep reading

Spotted a mistake or something out of date? Tell us on the contact page and we will fix it. How we write and update guides: about this site.