Skip to content

How to organise a Free Fire tournament for your college or community

Updated 11 November 2026 · 8 min read · By the Esports Hub team

Short answer

To organise a Free Fire tournament, fix the squad size and the number of matches, write the rules and the points scale, open a short registration form, run each match in a custom room, and publish a points table after every match. Most of the work is in the rules and the schedule, not in the game.

People who search for a Free Fire tournament are usually players looking for one to join. This guide is for the other side: the person who has to run it. If your college, club or community wants its own Free Fire event, this is the order to do things in, and the free tools that save you the spreadsheet work.

Start with the format, not the prize

Free Fire is a battle royale, so a match produces a placement for every squad rather than a single winner. That means the usual head-to-head bracket does not fit. The normal format is a set of matches played in the same lobby, with points for placement and kills added up across all of them. The squad with the most points at the end wins.

Decide three numbers first: squads per lobby, matches per day, and how many matches count. Six matches is a common length for a one-day event, because it is long enough that one lucky match does not decide the result and short enough to finish in an afternoon. If you have more squads than a lobby can hold, split them into groups and send the best squads from each group to a final lobby. The tournament formats guide shows how to count the matches.

Set up custom rooms

Matches for an organised event are played in custom rooms: private lobbies that the organiser creates and shares with the squads. The exact menus and the room limits change with game updates, so check the current version of the game before the event rather than relying on a screenshot from last year. Always do a test room with a few friends two days before.

  • Make one person the room host. They create the room and share the room ID and password only with the squads in that match.
  • Send the ID and password a few minutes before the match, not the day before, so nobody can join early or leak it.
  • Appoint a separate person to watch for rule breaks and to collect the results screenshot after each match. The host should not do this at the same time.
  • Agree a start time and a late rule in the rules page: for example, a squad that is not in the room at the start loses that match.

Write the points scale and the tie-breakers

Your points scale is part of your rules. Publishers and official tournaments publish their own scales and change them between seasons, so do not copy one without checking it, and do not claim yours is official. Choose a scale, write it down and publish it with the registration link. The scale below is the example used in the points table calculator; you can type your own.

Placement1st2nd3rd4th5th6th7th8th
Points106543211
Per kill1 point

Here is the same scale applied to three squads over two matches, worked out by the calculator code. Squad B finishes first with 26 points.

RankSquadMatch 1Match 2Total
1Squad B131326
2Squad A141125
3Squad C71118

Decide the tie-breakers now. A fair default is most first places, then most kills, then the better placement in the last match. The points table guide explains why each one is used.

Plan the day with real times

Six matches in one lobby at 30 minutes each, with a 10 minute gap for joining and results, starting at 10:00, ends at 13:50: about 230 minutes in total. That is the schedule maker's own arithmetic. If matches overrun, as they will, you have no slack, so add a longer break in the middle and announce a finish time an hour later than the sum.

Put the times in the match schedule maker, download the run-sheet and send it to every captain with the rules.

Registration and squads

Use one form per squad, not per player. Ask for the squad name, the captain's phone number, four player names with their in-game names and IDs, and one substitute. Close registration a day before the event so you can check the list. A free copyable registration form and the form fields guide cover what to ask and what to leave out.

If any player is under 18, get a parent or guardian's consent before the event. Do not collect more personal data than you need.

Prizes and the publisher's conditions

Game publishers set their own conditions for running tournaments and for charging entry or giving cash prizes, and the law on money prizes and entry fees can matter too. This guide does not tell you what is allowed. Read the publisher's current policy and ask your college or a legal adviser before you advertise a cash prize or an entry fee. A free-entry event with certificates and non-cash prizes avoids most of the questions.

Run, publish and finish

  1. Check squads in against the registration list. For an offline event use passes and the gate scanner.
  2. Brief the captains for five minutes: rules, schedule, who decides disputes.
  3. Play each match, collect the result screenshot, and enter placements and kills in the calculator.
  4. Show the standings on a screen between matches with the display screen.
  5. After the last match, publish the final table and give out certificates.

A worked tie-break

Two squads can finish level on points, so decide the order before the event. Suppose Squad X finished 1st with 2 kills and 4th with 3 kills, and Squad Y finished 2nd with 5 kills and 3rd with 3 kills. With the example scale (10, 6, 5, 4, 3, 2, 1, 1 and 1 point per kill) the matches are worth 12 and 7 for X, and 11 and 8 for Y. Both total 19.

The points table calculator ranks Squad X first, because it has one first place and Squad Y has none, and it marks both rows as decided by a tie-break. Y has more kills (8 against 5), but wins are checked first. If you would rather reward kills, write kills first in your rules and say so before the first match.

Checklist for the week before

  1. Rules and the points scale published with the registration link.
  2. Registration closed a day early and the squad list checked for duplicate players.
  3. A test custom room run with a few friends on the current version of the game.
  4. A room host, a referee and a results person named, as three different people.
  5. A schedule with slack sent to every captain.
  6. A screen or projector ready for the live table, and a plan for certificates.

Common mistakes

  • Sharing the room ID and password the day before, so a squad joins early or a stranger joins.
  • Letting squads send their own screenshots. Have an official take the result screen.
  • Changing the points scale or the kill value after the first match.
  • Using one person as host, referee and scorer. Mistakes follow.
  • Announcing a cash prize before reading the publisher's conditions.

Questions and answers

The things people ask most about this, answered plainly.

  1. How do I organise a Free Fire tournament for my college?

    Fix the squad size and the number of matches, write the rules and the points scale, open a short registration form with one entry per squad, run each match in a custom room and publish the table after every match. Most of the work is in the rules and the schedule, not the game. The free points table calculator, registration form and match schedule maker on this site cover the paperwork, and none needs an account.

  2. How many matches should a one-day Free Fire event have?

    Six matches is a common length. It gives enough games that one lucky match does not decide the winner, and it can finish in an afternoon. As an illustration, six matches in one lobby at 30 minutes each with a 10 minute gap, starting at 10:00, end at 13:50 in the match schedule maker. Matches overrun, so add a longer break and announce a finish time an hour later than the sum.

  3. What points scale should I use for a Free Fire custom room tournament?

    Use the one in your own rules. Official tournaments publish their scales and change them between seasons, so copy one only after checking it, and say clearly that yours is a custom scale. The points table calculator lets you type any placement scale and kill value; its starting numbers (10, 6, 5, 4, 3, 2, 1, 1 and one point per kill) are only an example. Publish your scale with the registration link.

  4. How do I break a tie between two squads?

    Write the order before the event. A fair default, and the one the calculator applies, is most first places, then most kills, then the better placement in the last match. For example, two squads on 19 points: the one with a win ranks above the one with more kills but no win. If squads are still level, say whether you play a decider or the head official decides.

  5. Can I run a Free Fire tournament with free entry?

    Yes, and it is the simplest option. Entry fees and cash prizes raise questions about the game publisher's current conditions and about the law that applies to you, so check both and ask your college before you advertise either. A free-entry event with certificates and non-cash prizes avoids most of those questions, and the certificate maker on this site prints one page per name for everyone who took part.

  6. How do I share the room ID and password safely?

    Make one person the room host, create the room shortly before the match and share the ID and password only with the squads in that match, a few minutes before the start, not the day before. Use a separate person to watch for rule breaks and collect the result screenshot, so the host is not doing both. Then enter placements and kills in the points table calculator so the standings are ready to show on a screen.

Try it

Free to use, no account needed.

Keep reading

Spotted a mistake or something out of date? Tell us on the contact page and we will fix it. How we write and update guides: about this site.