How to run check-in at the gate of a gaming event
Updated 11 November 2026 · 6 min read · By the Esports Hub team
Short answer
To run check-in at the gate, decide how many doors you need, give each a volunteer and a phone, test the scanner on the real network or use an offline pack, and keep a manual list as backup. Scan signed passes so copies are caught.
Check-in is the first thing every guest sees and the first place an event can go wrong. A queue that does not move, a fake card that gets in, or a guest list nobody can find all start at the gate. A little planning removes most of it.
Before the day
- Fix the guest list. Anyone not on it needs an organiser's approval at the gate.
- Give everyone a pass with their name, role and a QR code. See player ID cards and passes.
- Decide the number of doors from the crowd: one scanner can check a person in a few seconds, so what matters is the arrival peak, not the total.
- Test everything on the real venue network, or have an offline plan.
Online or offline?
- Online with a shared list: every door sees the same list, so a guest who has already come in at one door is flagged at another. You need a working connection.
- Offline pack: the guest list and the checking secret are loaded on the phone beforehand and nothing needs the internet. A second door does not know about the first door's scans unless you merge them afterwards.
- A mix: scan live when there is signal, and keep scanning when it drops. Scans made without a connection are saved on the phone, marked as not yet checked, and sent when the signal returns.
Venues with crowded Wi-Fi are exactly where connections fail, so always have the offline option ready. The free gate scanner works both ways.
Who stands where
- A greeter at the front of the queue to tell people what to have ready.
- A scanner at each door. Give each door its own key or login, so you can see which door scanned whom and switch one off if a phone is lost.
- A runner for problems: lost passes, not on the list, minors without consent. Keep them out of the queue so it keeps moving.
What the scanner should tell the guard
| Result | What it means | What the guard does |
|---|---|---|
| Green: genuine | Pass is real and this is the first scan | Let the person in; glance at the photo and role |
| Amber: already checked in | This pass was already used, and when | Ask the person; call the runner if it is not them |
| Red: not valid | Edited, copied, for another event, or unknown | Do not let them in; send to the runner |
| Blue: not verified yet | No signal; the scan is saved for later | Check the card by eye and let the runner know |
Handling problems
- Lost pass: look the person up by name on the list, check their ID against the name, and re-issue one pass. The old code should then stop working.
- Role changed after printing: a pass signed for the old role will fail by design. Print a new one.
- Minor without consent: do not let them in as a player until the consent is recorded.
- Phone lost: switch that door's key off straight away.
After the event
Export the attendance list. It tells you who really came, which doors were slow, and what to fix next time. Delete personal data you no longer need.
How many doors do you need?
It depends on how fast people arrive, not on how many come in total. As an illustration, if checking one guest takes about six seconds, one door handles about ten guests a minute. If 200 guests arrive within 20 minutes, that is 10 a minute, so one door is enough. If 600 arrive in the same 20 minutes, that is 30 a minute, so you need three doors. Time a real check-in at your own gate with a few volunteers and use those numbers.
Staggering arrival times helps more than adding doors: give each team a time slot to arrive in, and the queue spreads out.
Equipment checklist
- A charged phone for each door, plus a power bank each.
- A printed copy of the guest list as a last resort.
- A few spare printed passes and a pen for changes.
- A table, a banner saying which door is which, and a rope or barrier if the queue is long.
- The gate key or offline pack for each phone, tested the day before.
- A named person who can approve exceptions.
Questions and answers
The things people ask most about this, answered plainly.
How many people and doors do I need for event check-in?
Start with two people per door: one to scan and one to handle problems, plus a greeter at the queue if it is long. The number of doors depends on the arrival peak, not the total crowd. If one check takes about six seconds, one door handles around ten guests a minute. Time a real check-in with volunteers and use your own figure. Staggering team arrival times often helps more than adding a door, and the gate scanner on this site gives each door its own key.
What if there is no mobile signal at the gate?
Use an offline pack made in the ID card maker, which loads the guest list and the checking secret onto the phone so nothing needs the internet. Or scan in live mode: scans made without a signal are saved on the phone, marked as not yet verified (blue on the result screen), and sent when the connection returns. Crowded venue Wi-Fi is where connections fail, so test at the venue and always keep the offline option ready.
What do the green, amber, red and blue scan results mean?
In the gate scanner, green means the pass is genuine and this is its first scan, so the guard lets the person in and glances at the photo and role. Amber means the pass was already checked in, with the time shown, so ask the person and call the runner if it is not them. Red means the pass is not valid: edited, copied, for another event or unknown. Blue means no signal, the scan is saved and unverified, so check by eye.
What do I do when a pass is rejected?
Do not argue at the door. Send the person to a help desk or runner with the printed guest list. If they are on the list and lost the card, look them up by name, check their ID against the name and issue one replacement; the old code should stop working. If a pass fails because the role changed after printing, that is by design: print a new card in the ID card maker. A minor without recorded consent should not enter as a player yet.
How do several doors share one guest list?
Save the event online with a free account and create a gate key for each door. Every phone then shares one live list, so a guest who came in at door one shows as already checked in at door two, and you can see which door each guest used. A key can only check guests in and expires after the time you choose; revoke it from your account and that phone stops working immediately, which is what to do if a phone is lost.
Do door staff need an account to use the scanner?
No. They need only the gate key you give them, which can only check guests in, or an offline pack. They open the gate scanner on their own phone, load the pack or paste the key, and point the camera at a card. Because the key is limited and expires, you can hand it to volunteers without giving them access to your event data, and switch it off if a phone goes missing.
Try it
Free to use, no account needed.
Keep reading
Spotted a mistake or something out of date? Tell us on the contact page and we will fix it. How we write and update guides: about this site.