Tournament formats: single elimination, double elimination, round robin and groups
Updated 11 November 2026 · 7 min read · By the Esports Hub team
Short answer
Choose single elimination when time is short, double elimination when fairness matters, a round robin for small fields and groups followed by a knockout for bigger ones. Count the matches first: n − 1 for single elimination, n × (n − 1) ÷ 2 for a round robin.
The format decides how long your event takes, how fair it feels and how many matches you must schedule. Here are the common formats, the number of matches each needs, and when each is the right choice.
Single elimination
Lose once and you are out. With n teams you need exactly n − 1 matches, because every match removes one team and only one team is left at the end. 16 teams need 15 matches in four rounds.
- Good for: short events, many teams, little time.
- Weakness: one bad match ends a team's day, so it is less forgiving. A strong team can go out in round one.
Byes
If the number of teams is not a power of two (2, 4, 8, 16, 32...), some teams skip the first round. Those skips are called byes. The usual rule: round the team count up to the next power of two, and give the byes to the highest seeds. With 11 teams you round up to 16, so 5 teams get byes. The free bracket maker adds them for you.
Seeding
Seeding places the strongest teams so they cannot meet until late. In a standard bracket seed 1 plays the lowest seed, and seeds 1 and 2 can only meet in the final. If you have no information about strength, draw seeds at random and say so.
Double elimination
A team must lose twice to be out. There is a winners' bracket and a losers' bracket. It needs up to 2n − 2 matches, or 2n − 1 if the team from the losers' bracket beats the unbeaten finalist and a second final is needed. The free double elimination bracket maker builds it for you.
- Good for: events where fairness matters and you have the time.
- Weakness: about twice the matches of single elimination and a more complicated schedule.
Round robin
Every team plays every other team once. With n teams that is n × (n − 1) ÷ 2 matches: 6 teams play 15 matches, 8 teams play 28. It is the fairest format because no single result decides everything, and it grows fast. The round robin generator makes the fixtures and the table.
- Good for: small groups (up to about 6 or 8 teams) and leagues.
- Weakness: too many matches for a large field. You also need tie-breakers for the table.
Groups, then knockout
Split the teams into groups, play a round robin inside each group, and send the best teams from each group to a single-elimination bracket. It combines fairness in the early rounds with a clear finish.
Example: 16 teams in 4 groups of 4. Each group plays 6 matches, so 24 group matches. The top 2 from each group go through: 8 teams, which need 7 knockout matches. Total 31 matches.
Points over several matches
Battle royale games put many teams in one lobby. Teams collect points over several matches and the highest total wins. See the battle royale points table guide.
How to choose
| Situation | Format |
|---|---|
| One day, many teams, head-to-head game | Single elimination |
| You want a second chance for every team and have time | Double elimination |
| 6 to 8 teams or fewer, a league | Round robin |
| 12 to 32 teams, two days | Groups then knockout |
| Battle royale | Points table over several matches |
Whatever you choose, write it in the rules and publish the schedule before the first match. See how to run a college esports tournament.
A worked example: 20 teams in one day
Say you have 20 teams, one day, a head-to-head game, and you can run 4 matches at the same time. Single elimination is the only format that fits. Twenty is not a power of two, so the bracket rounds up to 32 places: 12 teams get a bye and 8 teams play in the first round.
| Round | Matches | Teams left after |
|---|---|---|
| Round 1 (the 8 teams without a bye) | 4 | 16 |
| Round 2 | 8 | 8 |
| Quarter-finals | 4 | 4 |
| Semi-finals | 2 | 2 |
| Final | 1 | 1 |
That is 19 matches, which matches the n − 1 rule (20 − 1). If each match takes about 40 minutes including setup, and you can run 4 at once, the rounds take roughly 40, 80, 40, 40 and 40 minutes: about four hours of matches, plus breaks. Change the numbers to your own and you can plan the day.
Double elimination for the same field would need up to 38 matches, which does not fit in a day with 4 lobbies. This is the kind of arithmetic worth doing before you choose.
Mistakes to avoid
- Choosing a format you like without counting the matches and the time.
- Forgetting the bronze or third-place match if prizes depend on it. Decide before the event.
- Seeding by who you know instead of by a rule. If you cannot rank teams, draw seeds at random and say so.
- Not telling teams how many matches they are guaranteed. In single elimination a team may play only one match, so tell them before they travel.
Questions and answers
The things people ask most about this, answered plainly.
Which tournament format is fastest for a one-day event?
Single elimination. For n teams it needs exactly n − 1 matches, because each match removes one team, so 16 teams need 15 matches in four rounds. The drawback is that half the teams play only once, so tell teams how many matches they are guaranteed before they travel. The bracket maker on this site builds it from a pasted team list, adds byes for the top seeds if the count is not a power of two, and lets you click winners forward.
Which tournament format is the fairest?
A round robin, where every team plays every other team, is the fairest because no single result decides everything. Double elimination is next: a team is out only after two losses. Both cost matches. A round robin for n teams needs n × (n − 1) ÷ 2 matches, which grows quickly, and double elimination needs up to 2n − 2. The round robin generator and the double elimination generator on this site build the full fixtures so you can count before you commit.
What format should I use for 16 teams?
It depends on your time. Single elimination needs 15 matches. Four groups of four plus a knockout of the top eight needs 31: 24 group matches and 7 knockout matches. Double elimination needs up to 30, or 31 with a reset final. A full round robin needs 120, which is almost always too many. Put the matches, the lobbies and the match length into the match schedule maker to see which of these actually finishes inside your day.
How do byes work when the number of teams is not a power of two?
Round the team count up to the next power of two and give the empty places to the highest seeds as byes, so those teams skip the first round. With 11 teams you round up to 16, which makes 5 byes, and the bracket still has only 10 real matches because a bye is not a match. The bracket maker and the double elimination generator add byes automatically for any number of teams, so you never have to redraw.
How do I choose between groups and a knockout or a points table?
Use a points table when many teams play in the same lobby, as in battle royale games. Use groups followed by a knockout when you have 12 to 32 head-to-head teams and two days: groups give everyone several matches, the knockout gives a clear finish. The points table calculator, round robin generator and bracket maker on this site cover each stage, and all three can open on a TV through the display screen.
How many matches can I actually run in a day?
Do the sum in two steps. First count the matches the format needs, then divide by the lobbies, servers or pitches that can run at once, and multiply by the match length plus the gap for joining and results. The match schedule maker does this and shows the finish time, with optional longer breaks. In knockout brackets a round cannot start until the previous one finishes, so a real day runs slower than the sum; add slack.
Try it
Free to use, no account needed.
Keep reading
Spotted a mistake or something out of date? Tell us on the contact page and we will fix it. How we write and update guides: about this site.