Skip to content

How to print ID cards: PVC card printing, shops and printing at home

Updated 11 November 2026 · 7 min read · By the Esports Hub team

Short answer

To print ID cards, make a print-ready PDF at real size, then either take it to a local shop that prints on PVC cards or print it on thick A4 paper or card at home and cut along the crop marks. Check one proof card for spelling, photo and QR before printing the full set.

Most people who search for card printing near them want the same thing: cards that look professional in their hands, in time for the event. You have two routes, a shop with a PVC card printer or a home or office printer. Both start from the same file, and the checks are the same.

Make the file first

Design the cards in the ID card maker and download the PDF. It prints at real size, with crop marks, optional 3 mm bleed and mirrored backs for double-sided printing. Check the size you choose: wallet cards are 85 × 54 mm, and there are also lanyard cards, event badges, wristband strips and phone passes. Choose the one that matches your holder or lanyard before you print.

Route 1: a PVC card printing shop

Plastic (PVC) cards are what most people think of as a real ID card. Many print and stationery shops can print them, and you can search for card printing in your own area. Prices and turnaround differ from shop to shop, so ask for a quote and do not rely on a figure from the internet.

  • Ask what file they need. Many shops will take a PDF or PNG files at the card size.
  • Ask whether they print both sides and whether you need to send a separate back.
  • Ask about bleed and whether they will cut or the printer prints edge to edge.
  • Ask for one proof card before they print the full set.
  • Go at least a week ahead of the event, not the morning of.

Because every shop works differently, treat the ID card maker's PNG export as the safest thing to hand over: one picture per card, front and back.

Route 2: print at home or in an office

  1. Print one page as a test on plain paper. Set the printer to 100% or Actual size, not Fit to page.
  2. Hold the test sheet against a real card or a ruler to confirm the size.
  3. Print the full set on thick paper or card stock. Print double-sided if the backs are included, then check that fronts and backs line up.
  4. Cut along the crop marks with a sharp blade and a steel ruler, or a paper trimmer.
  5. Laminate the cards, or put them in clear card holders, so they survive the day.

This route is cheaper and quicker, and it is fine for a one-day event. For anything that must last, use PVC.

The proof checklist

  • Names spelled correctly, checked against your roster.
  • Each photo matches its person.
  • The QR code scans with the gate scanner from a printed card, not only from the screen.
  • Text is readable at arm's length and nothing is too close to the cut line.
  • Colours look right: screens and printers differ, so look at a printed sample.

Pack and hand over

Sort cards by team, put each team's cards in an envelope with the captain's name, and bring spares and blank cards for last-minute additions. The player ID cards guide and the gate check-in guide cover handing cards out and what the gate should check.

A worked plan: 60 cards in two days

Say you need 60 cards for an event on Saturday. On Monday finalise the roster and photos. On Tuesday download the PDF and the PNG pictures from the ID card maker, print one page at home on plain paper at 100%, hold it against a real card, and scan the QR code with the gate scanner. On Wednesday take the files to a shop and ask for a proof. On Thursday approve the proof. On Friday collect, sort by team and put each team's cards in an envelope. That leaves a day for a reprint if something is wrong.

Common mistakes

  • Printing at Fit to page, so the card is smaller than 85 × 54 mm and the QR code is too small to scan.
  • Not asking for a proof, then finding a misspelt name on every card.
  • Giving the shop a screenshot instead of the PDF or the PNG pictures.
  • Printing double-sided without checking that fronts and backs line up.
  • Cutting by eye instead of along the crop marks.
  • Leaving the printing to the morning of the event.

Questions and answers

The things people ask most about this, answered plainly.

  1. Can I print ID cards at home?

    Yes. Download the PDF from the ID card maker, print one test page on plain paper at 100% or Actual size (not Fit to page), and hold it against a real card to check the size. Then print the full set on thick paper or card stock, cut along the crop marks with a sharp blade and a steel ruler, and laminate or use clear card holders. It is cheaper and quicker, and fine for a one-day event.

  2. How do I get PVC ID cards printed near me?

    Search for card printing or PVC card printing in your own area, ask for a quote and a proof, and give the shop the PDF or the PNG pictures from the ID card maker. Prices and turnaround differ between shops, so ask before you commit and do not rely on a figure from the internet. Go at least a week before the event and ask for one proof card before they print the full set.

  3. What file should I give a card printing shop?

    Ask what they need. Many shops take a PDF or PNG files at the card size. The ID card maker downloads a PDF at real size with crop marks and optional 3 mm bleed, plus a zip of PNG pictures, one per card, front and back. Because every shop works differently, the PNG pictures are the safest thing to hand over. Ask whether they print both sides and whether you must send the back separately.

  4. What size should I print ID cards?

    Wallet cards are 85 × 54 mm. The ID card maker also offers lanyard cards, event badges, wristband strips, poster cards, story cards and phone passes, on A4 or US Letter. Choose the shape that fits your lanyard or holder before you print, and always print a test page first. If the test is smaller or larger than a real card, check that the printer is set to 100%.

  5. What is bleed on a printed ID card?

    Bleed is extra background that extends past the cut line, so there is no white edge if the cut is slightly off. The ID card maker offers an optional 3 mm bleed. If you print at a shop, ask whether they cut or print edge to edge and whether they need bleed. At home, keep text and the QR code at least 3 mm inside the edge so a small cutting error does not clip them.

  6. How do I check printed cards before the event?

    Check names against your roster, check each photo matches its person, make sure the text can be read at arm's length, and scan a printed card, not only the screen, with the gate check-in scanner. Look at a printed sample for colour, because screens and printers differ. Sort cards by team in envelopes, and bring spares and blank cards for last-minute additions.

Try it

Free to use, no account needed.

Keep reading

Spotted a mistake or something out of date? Tell us on the contact page and we will fix it. How we write and update guides: about this site.