Skip to content

BGMI points system and points table for tournaments

Updated 16 November 2026 · 6 min read · By the Esports Hub team

Short answer

The BGMI points system adds placement points (10 for first place, falling to 0 from ninth) to one point for every kill, match after match. The team with the highest total after the last match tops the points table. Tie-break rules are set by each event.

If you run a BGMI scrim, college event or community cup, you need a points table before the first match starts. This guide gives you the placement and kill values, a worked table you can check by hand, the tie-break choices, and the common ways organisers get the totals wrong.

Placement points plus kill points

A BGMI tournament does not rank teams by wins alone. Every match gives each team two kinds of points, and the points table is the running total of both.

  • Placement points depend on where the team finished in the match.
  • Kill points depend on how many opponents the team finished.

In that table a team earns one finish point for every finish (kill), and the team with the highest sum of finish points and placement points wins the match. The match winner is just the team that scored most in that single match, which is not always the team that got the chicken dinner. That is why a team can finish first in a match and still not lead the table.

Scoring rules change between seasons and between organisers. The numbers below are the ones we read in a published table on 16 Nov 2026. Always check the current rulebook of the event you copy, and write your own numbers into your own rules page.

The placement table

A published BGMI esports points table gives 10 points for first place, 6 for second, 5 for third, 4 for fourth, 3 for fifth, 2 for sixth, 1 each for seventh and eighth, and 0 for ninth to sixteenth.

FinishPlacement points
1st10
2nd6
3rd5
4th4
5th3
6th2
7th and 8th1 each
9th to 16th0

A BGMI classic match has up to 100 players, in solo, duo or squad of up to 4. Placement points go to the team, not to each player. For a smaller community lobby, keep the same top values and cut the table where your lobby ends.

A worked points table

Four teams play three matches. Each cell shows placement points plus kills. Only the four teams are shown, and the finishes are an invented example to show the sums.

TeamMatch 1Match 2Match 3TotalKills
Team A10 + 8 = 184 + 1 = 56 + 4 = 103313
Team B6 + 5 = 1110 + 6 = 165 + 2 = 73413
Team C5 + 3 = 86 + 4 = 104 + 3 = 72510
Team D4 + 2 = 65 + 7 = 1210 + 5 = 153314

Team B leads with 34 even though it won only one match. Teams A and D are level on 33. In this example the organiser decided that total kills break a tie, so Team D (14) ranks above Team A (13). The final order is B, D, A, C.

You can enter the same numbers in the points table calculator and compare. For the general idea behind any points table, see the points table guide.

Breaking ties on the table

A full BGMI tie-break order could not be confirmed from an official rulebook, so the guides label any tie-break as an example the organiser sets.

Pick one order, publish it before match 1 and apply it the same way to every team. Options organisers commonly use:

  1. Most match wins (chicken dinners).
  2. Most total kills across the event.
  3. Highest placement points.
  4. Result of the last match played.

Whatever you choose, write it in the rules page next to the points values. A tie-break announced after the tie is a dispute waiting to happen.

Running the table on match day

  1. Fix the point values and tie-break in your rules before registration closes.
  2. Collect each match result from the end-of-match screen: placement and kills for every team.
  3. Enter results straight after each match, and have a second person check the sheet against the screenshot.
  4. Show the live table on a TV with the display screen so teams can see their position.
  5. Lock the table once the last match is entered and share the final version as an image or CSV.

If you want the same system for another game, read the Free Fire points system and points table guide. For the room side, use the BGMI and Free Fire custom room setup guide. Ready to enter a lobby? Open the BGMI points table page.

Common mistakes

  • Counting kills twice, once in the kill column and again inside the total.
  • Giving points to the match winner only and forgetting the teams below.
  • Using last season's values after the game or event changed them.
  • Entering a team under two spellings, so it splits into two rows.
  • Announcing the tie-break after two teams are already level.
  • Skipping the check of the screenshot, so a typo in kills moves a team two places.

Questions and answers

The things people ask most about this, answered plainly.

  1. How many points does a kill give in the BGMI points system?

    In the published table we read, each finish (kill) gives the team one point, added to its placement points for that match. Kill points go to the team, not the individual player. Your own event can set a different value, so write the number in the rules page and keep it the same all event.

  2. How do I break a tie on a BGMI points table?

    Choose the order before the first match and publish it. Common choices are most match wins, then most total kills, then highest placement points, then the result of the last match. We could not confirm one official order from the rulebook, so treat these as an organiser's choice and follow the official rulebook if you copy a Krafton event.

  3. How many points does first place get in a BGMI match?

    The table we read gives 10 placement points for first place, 6 for second, 5 for third and 4 for fourth. Add one point for every kill. So a team with first place and 8 kills scores 18 for that match. Points values are set by the event, so check the current rulebook before you copy them.

Try it

Free to use, no account needed.

Keep reading

Spotted a mistake or something out of date? Tell us on the contact page and we will fix it. How we write and update guides: about this site.