How to make a round robin schedule: the circle method with a 6-team example
Updated 11 November 2026 · 7 min read · By the Esports Hub team
Short answer
In a round robin every team plays every other team once. For n teams there are n × (n − 1) ÷ 2 matches, so 6 teams play 15. The circle method builds the rounds: fix one team, rotate the others one place each round, and with an odd number of teams one team has a bye each round.
A round robin is the fairest format for a small field because every team plays every other team and the best record wins. The hard part is writing the fixtures so no team plays twice in a round. The circle method does it in a few steps, and the free generator does it for you.
How many matches and rounds
For n teams, each pair plays once, so there are n × (n − 1) ÷ 2 matches. Six teams play 15 matches and eight teams play 28. If everyone plays everyone twice, home and away, the count doubles. With an even number of teams there are n − 1 rounds. With an odd number there are n rounds, and one team sits out each one.
The circle method
- Write the teams in two rows, the first half on top and the second half below, so that each team faces one other team.
- The pairs that face each other play in round 1.
- Keep the first team fixed. Rotate every other team one place around the circle.
- The new pairs play in round 2. Repeat until the teams are back where they started.
- If the number of teams is odd, add a dummy team called Bye. Whoever faces the Bye has a rest round.
Every pair meets exactly once and no team plays twice in a round. Alternate which team is listed first so that nobody is always the home side.
A worked example with 6 teams
Here are the fixtures the round robin generator builds for six teams: 5 rounds of 3 matches, 15 matches in all.
| Round | Match 1 | Match 2 | Match 3 |
|---|---|---|---|
| Round 1 | Team A v Team F | Team E v Team B | Team C v Team D |
| Round 2 | Team E v Team A | Team F v Team D | Team B v Team C |
| Round 3 | Team D v Team A | Team C v Team E | Team F v Team B |
| Round 4 | Team A v Team C | Team D v Team B | Team F v Team E |
| Round 5 | Team B v Team A | Team C v Team F | Team D v Team E |
If three matches can run at the same time (three lobbies or fields), each round takes one slot. At 30 minutes a match and a 10 minute gap from 10:00, the schedule maker finishes at 13:10: 190 minutes for the whole league.
Scoring and the table
A league needs a points rule and tie-breakers, and you must write them before the first match. A common football-style rule is 3 points for a win, 1 for a draw and 0 for a loss, which is the generator's default and which you can change. Then rank by points, then score difference, then scores for, then wins. See the esports rules template for wording.
When a round robin is the wrong choice
The number of matches grows quickly: 16 teams would need 120. For a big field use groups followed by a knockout, as explained in the formats guide. For battle royale games, a points table is the right tool.
Make your fixtures free with the round robin generator, enter scores as matches finish and show the live table on a screen with the display screen.
A worked example: four teams with scores
Four teams, Red, Blue, Green and Gold, play 6 matches in 3 rounds. The generator lists round one as Red v Gold and Green v Blue, round two as Green v Red and Gold v Blue, and round three as Blue v Red and Gold v Green. Suppose the scores are Red 2-1 Gold, Green 0-0 Blue, Green 1-3 Red, Gold 2-2 Blue, Blue 1-0 Red and Gold 4-1 Green.
| Rank | Team | Played | Won | Drawn | Lost | For | Against | Points |
|---|---|---|---|---|---|---|---|---|
| 1 | Red | 3 | 2 | 0 | 1 | 5 | 3 | 6 |
| 2 | Blue | 3 | 1 | 2 | 0 | 3 | 2 | 5 |
| 3 | Gold | 3 | 1 | 1 | 1 | 7 | 5 | 4 |
| 4 | Green | 3 | 0 | 1 | 2 | 2 | 7 | 1 |
That is the table the round robin generator produces with 3 points for a win and 1 for a draw. Red wins on 6 points. If two teams had been level, the next step would be score difference, then scores for, then wins.
Odd numbers: a 5-team example
With five teams, A to E, there are 5 rounds of 2 matches and one team resting in each round, 10 matches in all. Round one is A v Bye, E v B and C v D, so A rests. Each team rests exactly once.
Common mistakes
- Not writing the tie-breakers, so two teams on equal points cause an argument.
- Counting the bye as a match.
- Using a round robin for a big field. 16 teams need 120 matches.
- Forgetting that a match only counts in the table once both scores are entered.
- Always listing the same team first and calling it fair.
Questions and answers
The things people ask most about this, answered plainly.
How many matches are in a round robin?
n × (n − 1) ÷ 2 for n teams, because every pair plays once. 6 teams play 15 matches, 8 teams play 28 and 16 teams would need 120. Playing everyone twice, home and away, doubles the count. With an even number of teams there are n − 1 rounds. The round robin generator on this site lists every fixture round by round once you paste the team names. Use that number early: it is the first sum that tells you whether a round robin fits your day, or whether groups and a knockout would suit a larger field better.
What do I do with an odd number of teams in a round robin?
Add a dummy team called Bye. Whichever team faces it rests that round. In a single round robin every team gets exactly one bye, and with 5 teams there are 5 rounds of 2 matches, so 10 matches in all. The round robin generator does this for you and shows the empty seat as Bye, which it never mistakes for a team of that name. The bye round is a free rest day for that team, so tell teams in advance when they rest, and do not count a bye as a win or a loss in the table.
How do I decide the order of a league table?
By points first, then tie-breakers written in advance. The generator uses points (3 for a win, 1 for a draw and 0 for a loss by default, all changeable), then score difference, then scores for, then wins, then name, so the same results always give the same table. Write your own order in the rules before the first match. A match counts only when both scores are filled in.
Is there a free round robin generator?
Yes, on this site. Paste your teams, choose whether everyone plays twice, get every fixture round by round, download the fixtures or the table as a CSV file, enter each score as the match finishes and read the league table, which updates immediately. It needs no account and runs in your browser, and you can open the table full screen on a TV with the display screen.
How do I make a round robin fair for home and away?
Alternate which team is listed first so nobody is always home or always second. The generator assigns the first-listed side to whichever team has had it less often, and in a double round robin the second half repeats each pairing with sides swapped. For esports, treat first-listed as the side that picks first, for example the map or side, and say that in the rules.
How long will a round robin take?
Divide the matches by how many can run at once, then add match length and gaps. For example, 6 teams have 15 matches in 5 rounds of 3; with 3 lobbies, 30 minute matches and a 10 minute gap from 10:00, the schedule maker finishes at 13:10 (190 minutes). With one lobby it would take 15 slots. Enter your own numbers to see your finish time. Running more matches at the same time shortens the day, but only as far as the number of matches in a round allows, so check how many lobbies you really have.
Try it
Free to use, no account needed.
Keep reading
Spotted a mistake or something out of date? Tell us on the contact page and we will fix it. How we write and update guides: about this site.