Skip to content

How to run a custom room tournament, step by step

Updated 12 November 2026 · 9 min read · By the Esports Hub team

Short answer

To run a custom room tournament, decide how many squads each room can hold, split the squads into rooms, publish the rules and the points scale, schedule every round with real gaps, appoint one referee per room and record placement and kills after every match. Publish the table the same day.

A custom room tournament is a battle royale event where the organiser creates the rooms and the players join with a room ID and password. It needs no hardware and is why so many college and community events run on it. It also fails in predictable ways: late joiners, unclear rules and results nobody can check. This guide gives the order of work.

1. Fix the numbers first

Find out from the game itself how many squads or players a custom room can hold and which room settings you can control, because games and versions differ. This guide uses an assumed room size so the sums are visible: check the real figure in the game before you plan.

  • Number of squads you will accept, and the team size.
  • How many squads one room holds in your game.
  • How many rooms you can run at the same time, which depends on how many referees and spare accounts or devices you have.
  • Number of rounds each squad plays.

2. Work out rooms and matches

Example: 24 squads, a room that holds 12 squads (assumed), and 3 rounds. That needs 2 rooms per round and 6 matches in total. If the rooms run at the same time, the matches go in 3 slots.

With 30 minute matches and a 10 minute gap, starting at 14:00, the match schedule maker gives 3 slots and a finish at 15:50, which is 110 minutes. If you had only one room at a time, the same 3 slots would not be enough: the 6 matches would take 17:50 to finish. That one number often decides whether you need a second referee.

Remember that this is the best case. Add time for squads who join late, a room restart and a break. Rounds of 3 slots like this one assume nothing goes wrong.

3. Write the rules and the points scale

Start from the tournament rules template and add the battle royale parts: team size and substitutes, the points for each placement and each kill, tie-breakers, how late a squad can be, what happens if a player disconnects, and what is considered cheating. Check the game publisher's page for any conditions on running tournaments before you advertise prizes.

4. Register squads and make the room lists

  1. Collect squads with the registration form: team name, captain's contact, in-game IDs and substitutes.
  2. Confirm each squad in writing with the rules and the schedule attached.
  3. Split squads into rooms. For a fair split, draw the rooms in front of the captains or use a published random order. Rotate the rooms in later rounds if the format allows.
  4. Give each room one referee who owns the room ID and password and sends them to captains at a set time, not earlier.

5. Run each match to a checklist

  1. Referee creates the room and sends the ID and password to captains only.
  2. Squads join, the referee checks every player against the roster, and anyone not registered is removed.
  3. Start the match at the published time. Late squads miss it, as the rules say.
  4. At the end, the referee screenshots the result screen for every squad.
  5. The referee enters placement and kills into the points table and captains confirm.

Custom-room features and limits differ by game and change with updates. Test your setup in the real game a few days before the event.

6. Publish results as you go

After each round, share the table as an image and show it on a screen with the display screen. The detailed method is in recording and sharing custom room results. For game-specific tables see BGMI and Free Fire.

7. Finish properly

Publish the final table with the scale underneath, announce winners the same day and print certificates for the top squads and participants. Keep the screenshots and the roster until any dispute is closed.

Common mistakes

  • Planning from the match length alone and forgetting joining time and gaps.
  • Sharing the room ID in a big public group, so outsiders join.
  • One person trying to referee several rooms at once.
  • Changing the scale or the tie-breaker after matches start.
  • No screenshots, so a result cannot be checked.
  • Not testing the room settings in the real game beforehand.

Questions and answers

The things people ask most about this, answered plainly.

  1. How many squads should I put in one custom room?

    Use the number your game actually allows in a custom room, which differs by game and version, so check it in the game before you plan. Then divide your squads by that number to get rooms per round, multiply by rounds to get the total matches, and put the match count into the match schedule maker with the number of rooms you can run at once. If the finish time is too late, add a referee and a room, or reduce the rounds.

  2. How do I stop outsiders joining my custom room?

    Send the room ID and password only to captains, at a set time, and have the referee check every player against the roster before the match starts. Do not post the details in a public group. Remove anyone who is not registered. Registering with a form and confirming each squad in writing gives the referee a list to check, and ID cards or a pass link help at an in-person event.

  3. How long does a custom room tournament take?

    Work it out from your own numbers. Enter the total matches, the match length, the gap between matches and the number of rooms running at once into the match schedule maker and read the finish time. Then add slack for late squads, restarts and breaks, because the tool shows the best case. A tournament that looks fine at the match length alone often takes almost twice as long once joining and results are counted.

  4. What rules should a battle royale custom room tournament have?

    Cover team size and substitutes, the points for each placement and each kill, tie-breakers, how late a squad may be, what happens when a player disconnects, what counts as cheating and who decides disputes. The tournament rules template on this site gives you a base to edit. Check the game publisher's page for conditions on tournaments and prizes before you advertise, because they differ by publisher and change.

  5. How do I make the rooms fair?

    Draw the room split in front of the captains or by a random order you publish, and rotate the rooms in later rounds if your format allows. Keep the same points scale and the same rules in every room, give each room one referee, and collect a result screenshot after every match. Fairness here mostly means that every squad can see how the result was decided and can check it.

  6. What do I need to publish at the end?

    The final table with the points scale and the tie-breakers underneath, the winners, and a note of any corrections made during the event. The points table tool exports standings, the display screen shows them full screen, and the certificate maker prints one page per name for winners and participants. Keep the roster and the screenshots until disputes are closed, then delete personal details you no longer need.

Try it

Free to use, no account needed.

Keep reading

Spotted a mistake or something out of date? Tell us on the contact page and we will fix it. How we write and update guides: about this site.