Skip to content

Best free esports ID card makers compared (2026)

Updated 15 November 2026 · 9 min read · By the Esports Hub team

Short answer

It depends on the job. For fully custom artwork use Canva. For one personal gamer card use BotCamp or StyleNameLab. For printed cards posted to you, use a print service such as IDCreator. For a roster of players with a QR code, print sheets and gate check-in, use the Esports Hub esports ID card maker. Last checked 15 Nov 2026.

People search for an esports ID card maker and get a mix of logo makers, template sites and gamer profile card generators, and most of them do a different job from the one an organiser has. An organiser has a roster, a date and a gate. This guide compares the tools we could read, says plainly what each one is for, and gives you a way to pick. We run one of the tools, so read our claims against the table and check each site yourself. Last checked: 15 November 2026. Prices, features and terms change, so check each site for its current terms.

Open the esports ID card maker

The comparison at a glance

What these words mean. CR80: the standard ID card size (credit-card size, 85.6 x 54 mm). Bleed: a few extra millimetres of colour around the edge, so no white border shows after cutting. Crop marks: small lines in the sheet corners that show where to cut. Signed QR code: a QR code with a secret signature, so a copied or edited card fails the check. Gate check-in: scanning that QR code on a phone at the door.

We read one page of each tool on 15 November 2026 and wrote down only what it said. "Not checked" means the fact was not in the text we read. It does not mean the feature is missing. We did not sign up for or test any of the other products. We could not read Canva's page, so for Canva we state only that it is a general design tool with ID card templates.

ToolFree?No sign-up?Whole rosterQR codePrint-ready sheetBuilt for tournaments
Esports HubYesYesYesYes, signedYesYes, with check-in
CanvaFree templates and editorNot checkedNot checkedNot checkedNot checkedNo, general design tool
Template.netMentions freeNot checkedMentions bulkMentions QRMentions printNo, general templates
MuftToolsNot checkedYesYes, Excel or CSVYesYes, A4 with crop marksNo, generic IDs
ThemikuNot checkedNot checkedYes, bulkYes, QR or barcodeNot checkedNo, generic
BotCampNot checkedYesNo, one cardNot checkedNot checkedNo, personal card
StyleNameLabNot checkedNot checkedNo, one cardNot checkedNot checkedNo, personal card
IDCreatorNo, paidNot checkedNot checkedNot checkedOrdered from themNot checked

Do not take our word for it. Here is each site's own page, so you can check: Canva, Template.net, MuftTools, Themiku, StyleNameLab and IDCreator. These are plain links to the home pages, with no tracking. We could not confirm a web address for BotCamp, so it has no link.

Free and no sign-up are not what sets one tool apart: several of these say they are free or need no sign-up. The real difference is the job each tool is built for.

Decision guide: if you need this, use that

  • You want fully custom artwork, your own layout and illustration: use Canva. It is a general design tool with ID card templates, and it will beat any card maker on creative freedom.
  • You want one personal gamer card with your own name, UID, level and K/D for Call of Duty Mobile, Free Fire or PUBG: use BotCamp, which makes a no sign-up gamer licence or profile card, or StyleNameLab, a gaming profile card generator.
  • You want printed cards made and delivered, with no printer of your own: IDCreator is a paid print-ordering service with gamer ID card templates. You pay for the printing and posting.
  • You need generic school or employee ID cards in bulk, with A4 sheets: MuftTools (India) says it takes bulk Excel or CSV, standard CR80 size, QR and A4 PDFs with 10 cards per sheet and crop marks, and Themiku (India) says it offers front and back templates, QR or barcode and bulk.
  • You want sports or ID templates from a general template library: Template.net mentions bulk, QR, print and free.
  • You have a roster of players, coaches and staff, want a QR that a gate scanner can check, and want print-ready sheets from the same list: use the Esports Hub esports ID card maker. It suits rosters from about ten players up to a few hundred; for a very large roster, use the team filter on the Print step and make the PDF in batches.

Notice the pattern. Most of these tools make a card. The question for an organiser is what happens before the card (collecting and cleaning a roster) and after it (checking people in at the gate). That is where a tool built for tournaments helps, and where a design tool does not.

What each tool is, from its own page

Canva

A general design tool with ID card templates. It is best for fully custom artwork. We could not read its page, so we say nothing more about its features, limits or terms.

Template.net

A template site. Its page mentions bulk, QR, print and free, with general sports and ID templates. It is not tournament-specific.

MuftTools and Themiku (India)

MuftTools says no sign-up, bulk from Excel or CSV, standard CR80 size and an A4 PDF with 10 cards per sheet and crop marks, for generic school and employee IDs. Themiku says templates with front and back, QR or barcode, and bulk, also generic. Both overlap with us on the card and the sheet; neither is framed around tournaments.

BotCamp and StyleNameLab

BotCamp offers a no sign-up gamer licence or profile card for CODM, Free Fire and PUBG, with name, UID, level and K/D. StyleNameLab is a gaming profile card generator. Both make a personal card for one gamer. They are not roster tools, and they are fun to share rather than a way to run a gate.

IDCreator

A paid print-ordering service with gamer ID card templates. You get physical cards delivered, which none of the free browser tools do.

Esports Hub

Our own tool, so read this with care. It is free and needs no sign-up. You paste rows or upload a CSV, each team gets a design, each card can carry a signed QR code, and the PDF is laid out on A4 or US Letter with optional crop marks and 3 mm bleed. The same roster makes an offline check-in pack for the gate check-in scanner. The names and photos you add stay in your browser.

How to design a good tournament ID card

Whichever tool you choose, the card itself decides whether the gate runs smoothly. Start from what the card must do: tell a player from a visitor, and let a volunteer check it in a second.

Fields to include

  • Event name and date, so a card from last year is obvious.
  • Full name as in the roster, large enough to read at arm's length.
  • Team name and a team logo or colour.
  • Role in words (Player, Substitute, Coach, Manager, Staff, Guest, Caster, Media, VIP, Organiser or Volunteer), with a colour per role.
  • A card ID that matches the roster, and a QR code.
  • A photo only if the gate will really compare faces, and only from people who agreed.
  • A return-to line and an organiser contact on the back, plus two or three short rules.

Sizes

The credit-card size, 85.6 x 54 mm (CR80 at a print shop), is the usual player card and fits standard holders. Use an upright 54 x 85.6 mm or a larger 76 x 102 mm badge for lanyards, and leave room for the punch slot. A wristband strip works for zones. Whatever you pick, test one page on plain paper at 100 percent before you print the full run.

What to put in the QR code

Put as little as possible. A signed pass that holds an event code, a card ID and a signature is enough, because the scanner looks the person up in the roster. Do not put a name, a date of birth or an ID number in the QR. Print the code large with a quiet margin, in dark on light, and scan one printed card with a phone before printing the rest.

Step by step

  1. Clean the roster first: one row per person, the same spelling as the registration form, a role for everyone.
  2. Choose the card shape and one design per team.
  3. Check the longest name so nothing is cut off.
  4. Print a single proof page and scan its QR with the gate phone.
  5. Print the full run at least a day before the event, plus a few spare cards.
  6. Load the check-in pack on the gate phone and test one genuine and one copied card.

Security tips

  • Use a signed QR, so a copy or an edited role fails at the gate.
  • Keep the signing passphrase among the organisers; anyone who knows it can make valid passes.
  • Do not print government ID numbers on a card, and do not put a date of birth in the QR.
  • Check players under 18 against your own rules before issuing a card.
  • Delete the check-in pack from the gate phone after the event.

For more on the fields and on printing, read the player ID cards guide and printing PVC ID cards.

Common mistakes

  • Using a gamer profile card generator for a roster. It makes one personal card, not forty.
  • Starting in a design tool, then retyping every name. Start from the roster, not the artwork.
  • A QR code that holds only a name or an ID number. A copy then passes at the gate.
  • Printing the full run before scanning a proof.
  • Choosing by the word free alone. Several tools are free, so choose by what the tool is built to do.

Where Esports Hub is weaker

  • Fewer free design templates than Canva. There are 23 editable designs, and Canva is better for fully custom artwork.
  • No AI art.
  • No printed-card shipping service. You print the PDF yourself or at a print shop.
  • Rosters arrive by pasting rows or uploading a CSV, not by uploading an Excel file directly.

If any of these matter more to you than the link to the tournament, use another tool from this page. You can open the free ID card maker and try it before deciding: it needs no sign-up.

Questions and answers

The things people ask most about this, answered plainly.

  1. What is the best free esports ID card maker?

    There is no single best one, because the tools do different jobs. Canva suits fully custom artwork. BotCamp and StyleNameLab make one personal gamer card. IDCreator is a paid print-ordering service. For an organiser with a roster who wants a QR code, print-ready sheets and gate check-in from the same list, Esports Hub is built for that, and it is free with no sign-up. We make that tool, so check the comparison table and try the others before you decide.

  2. Can I make esports ID cards without signing up?

    Yes, with some tools. In what we read on 15 November 2026, MuftTools and BotCamp both say no sign-up, and the Esports Hub card maker needs no account either. Free and no sign-up are common, so they are not a reason to pick one over another. Check each site for its current terms before you start, because they can change. An account on Esports Hub is only needed for saving an event online, player invite links and live check-in across several doors.

  3. How do I make ID cards for a whole team or roster at once?

    Use a tool that takes a whole list. MuftTools says it takes bulk Excel or CSV and Themiku says bulk. On Esports Hub you paste rows copied from a spreadsheet or upload a CSV with the columns name, team, role, dob, gender and zones, and each person gets a card in their team's design. Profile card generators such as BotCamp and StyleNameLab make one card at a time, so they are not suited to a roster of players.

  4. What should be on a tournament ID card?

    The event name and date, the person's full name, their team, their role in words, a card ID that matches your roster and a QR code. Add a photo only if the gate will compare faces and the person agreed. On the back put a return-to line, an organiser contact and two or three rules. Keep names large, use a colour per role, and keep personal data such as a date of birth or a government ID number off the card and out of the QR.

  5. What size is a standard ID card, and how do I print it?

    The standard credit-card size is 85.6 x 54 mm, which print shops call CR80. Upright lanyard badges are usually 54 x 85.6 mm, with larger 76 x 102 mm badges for events. Print the PDF at 100 percent, not fit to page, and test one page on plain paper before the full run. Crop marks help you cut cleanly, and 3 mm of bleed helps a print shop trim without white edges. For PVC cards, ask the shop what file it needs and ask for one proof card first.

  6. Is it safe to put my players' details into an online ID card maker?

    It depends on the tool, so read its privacy page. With the Esports Hub card maker, the names and photos you add stay in your browser and are not sent to our servers, and only a free optional account stores an event on our server. For any tool, share only what the card needs, get permission before you use a photo, avoid ID numbers, and keep the roster file and any check-in pack safe. We cannot speak for how the other tools handle data, because we did not review their privacy terms.

Try it

Free to use, no account needed.

Keep reading

Spotted a mistake or something out of date? Tell us on the contact page and we will fix it. How we write and update guides: about this site.